Multiple Choice Questions

UV Visible Spectrometers Questions and Answers

UV Visible Spectrometers Questions and Answers

1. Beer Lambert’s law gives the relation between which of the following?

a) Reflected radiation and concentration
b) Scattered radiation and concentration
c) Energy absorption and concentration
d) Energy absorption and reflected radiation

Answer: c

Explanation: Beer Lambert’s law gives the relation between Energy absorption and Concentration. It was proposed by Beer and Lambert.

2. In which of the following ways, absorption is related to transmittance?

a) Absorption is the logarithm of transmittance
b) Absorption is the reciprocal of transmittance
c) Absorption is the negative logarithm of transmittance
d) Absorption is a multiple of transmittance

Answer: c

Explanation: Transmittance is the ratio of the radiant power transmitted by a sample to the radiant power incident on the sample. Absorption is the negative logarithm of transmittance.

3. Which of the following is not a limitation of Beer Lambert’s law, which gives the relation between absorption, thickness, and concentration?

a) Concentration must be lower
b) Radiation must have higher bandwidth
c) Radiation source must be monochromatic
d) Does not consider factors other than thickness and concentration that affect absorbance

Answer: b

Explanation: The law is derived assuming that the radiation is monochromatic. So, if bandwidth increases it will create deviation.

4. Beer’s law states that the intensity of light decreases with respect to ___________

a) Concentration
b) Distance
c) Composition
d) Volume

Answer: a

Explanation: Beer’s law states that the intensity of light decreases with the concentration of the medium. It was stated by Beer.

5. Lambert’s law states that the intensity of light decreases with respect to __________

a) Concentration
b) Distance
c) Composition
d) Volume

Answer: b

Explanation: Lambert’s law states that the intensity of light decreases with respect to the concentration of the medium. It was stated by Lambert.

6. The representation of Beer Lambert’s law is given as A = abc. If ‘b’ represents distance, ‘c’ represents concentration and ‘A’ represents absorption, what does ‘a’ represent?

a) Intensity
b) Transmittance
c) Absorptivity
d) Admittance

Answer: c

Explanation: ‘a’ represents the absorption constant. It is also known as absorptivity.

7. Which of the following is not true about Absorption spectroscopy?

a) It involves transmission
b) Scattering is kept minimum
c) Reflection is kept maximum
d) Intensity of radiation leaving the substance is an indication of concentration

Answer: c

Explanation: In Absorption spectroscopy, reflection must also be kept minimum along with scattering. Amount of absorption depends on the number of molecules in the material.

8. Transmittance is given as T = P/Po. If Po is the power incident on the sample, what does P represent?

a) Radiant power transmitted by the sample
b) Radiant power absorbed by the sample
c) Sum of powers absorbed and scattered
d) Sum of powers transmitted and reflected

Answer: a

Explanation: P represents radiant power transmitted by the sample. Transmittance is the ratio of radiant power transmitted by the sample to the radiant power that is incident on it.

9. What is the unit of absorbance which can be derived from Beer Lambert’s law?

a) L mol-1 cm-1
b) L gm-1 cm-1
c) Cm
d) No unit

Answer: d

Explanation: Absorbance has no unit. The units of absorptivity, distance, and concentration cancel each other. Hence, absorption has no unit.

10. What is the unit of molar absorptivity or absorptivity which is used to determine absorbance A in Beer Lambert’s formula?

a) L mol-1 cm-1
b) L gm-1 cm-1
c) Cm
d) No unit

Answer: a

Explanation: The unit of absorptivity is L mol-1 cm-1. If the concentration is represented as gm per litre it becomes L gm-1 cm-1.

You've successfully subscribed !
Share

Recent Articles

PLC Panel and MCC Panel Interface Signals
  • PLC Tutorials

PLC Panel and MCC Panel Interface Signals

The PLC panel and MCC panel interface signals are start, stop, run feedback, trip, local…

4 days ago
  • PLC Tutorials

Shutter Door Control using Motor and Limit Switches

 In this article, we are going to discuss about shutter door control using induction motor…

6 days ago
  • Electrical Basics

Electrical Drives – Modes, Types, Speed Control Applications

Electrical Drives control the motion of electric motors. Motion control is required in industrial and…

6 days ago
  • PLC Tutorials

PLC Ladder Logic Design: Control 3 Motors with Toggle Switch

PLC ladder logic design to control 3 motors with toggle switch and explain the program…

3 weeks ago
  • PLC Tutorials

VFD Simulator Download – Free Yaskawa V1000 Software

VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…

6 days ago
  • PLC Tutorials

Conveyor Sorting Machine PLC Program with Calculation Function

The conveyor sorting machine is widely used in the packing industries using the PLC program…

1 week ago