When choosing a control valve for a process, there are many things that must be considered, including the valveās flow characteristic, its size, noise, the potential for cavitation or flashing...
Pneumatic actuators as illustrated in Figure, provide for automatic or semiautomatic valve operation. These actuators translate an air signal into valve stem motion by air pressure acting on a diaphragm...
Pneumatic actuators use instrument air pressure to apply force on the diaphragm to move the valve actuator and then to position valve stem. The following photograph shows a cut-away control...
Spring and diaphragm pneumatic actuators can be “direct-acting”, meaning that air to the diaphragm casing pushes the actuator stem downward. This “air-to-close” action compresses the spring, which in turn pushes...
As the process industry continues to achieve more efficient and productive plant design, plant engineers and technicians are faced, almost daily, with new equipment designs and applications. One product, a...
A valve actuator is a device that produces force to open or close the valve utilizing a power source. This source of power can be manual (hand, gear, chain-wheel, lever,...
A pneumatic control valve actuator converts energy (typically in the form of compressed air) into mechanical motion. The motion can be rotary or linear, depending on the type of actuator....
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. AcceptRead More