SCADA Multiple Choice Questions
You can find the top 10 objective questions and answers on SCADA ( Supervisory Control and Data Acquisition ). A quiz also available at the end of the article to
Home » plc scada interview questions pdf
Tag : plc scada interview questions pdf
PLC Permissive for Motor Control
A engineer needs to write a PLC program to control a water pump driven by an electric motor. This water pump will be manually started and stopped by pushbutton switches,
Troubleshoot Allen Bradley PLC Logic
A engineer needs to write a program for an Allen-Bradley CompactLogix PLC to control a pressure relieving solenoid valve in a gas processing system. A pair of high-pressure control switches
Motor Trip Logic using PLC Programming
Programmable Logic Controller (PLC) Questions and Answers This PLC is being used to start and stop an electric motor, and also to shut it down automatically if any of three
PLC Pump Permissive Interlocks
The following PLC program was written to control the operation of a large electric motor-driven pump. A variety of “permissive” inputs protect the pump from damage under abnormal conditions, and
PLC Electric Motor Interlocks
Programmable Logic Controller Questions and Answers The following PLC program was written to control the operation of a large electric motor-driven pump. A variety of “permissive” inputs protect the pump
Programmable Logic Controller Questions and Answers
Refer the below Programmable Logic Controller Questions and Answers which are useful for the exam preparation. Programmable Logic Controller Questions 1. A switch or a pushbutton is a ________ input. 2.
PLC Programming Questions & Answers – 5
A engineer needs to write a PLC program to control a water pump driven by an electric motor. This water pump will be manually started and stopped by pushbutton switches,
PLC Programming Questions & Answers – 4
A engineer needs to write a PLC program to control a water pump driven by an electric motor. This water pump will be manually started and stopped by pushbutton switches,
PLC Programming Questions & Answers – 3
A PLC has been programming to control the starting and stopping of a three-phase electric motor. The program is supposed to require that the operator press and hold the “Start”