When your application needs to measure static or quasi-static loads, forces or weights, you would need to use a load…
Industrial process control is everywhere. Sometimes it is dangerous or complex. In other cases it may be relatively mundane. In…
Which Sensor? Thermistor, RTD or Thermocouple The concept of temperature From a physical point of view, heat is a measure…
How to select right thermocouple for your application? To select an ideal thermocouple first we need to understand the need…
The following factors are important in making the right commercial and technical choice for Solenoid Valve Selection Criteria: - Valve actuation…
Control Valve Packing is a sealing system which normally consists of a deformable material, in the form of solid or…
Process Variable Damping The PV Damping command of a transmitter changes the response time of the transmitter to smooth variations…
4-20 mA Loop Splitter Problems with Current Loop Loads in Series Not so good: A single 4-20 mA loop from…
Rotameter has a tapered tube with a float inside. As the measured fluid flows & pushes the float upward along…
Draw a ladder logic control circuit for the electric motor of an air compressor, controlled by two pressure switches: one…
