What is a Pneumatic Cylinder?
A pneumatic cylinder also called an air cylinder is the final component of the pneumatic or compressed air control mechanical device.
Types of Limit Switches – Principle, Advantages, Disadvantages
A limit switch is an electromechanical unit that consists of an actuator that is connected mechanically to the set of contacts.
Pneumatic Piping Design and Specification
Pneumatic piping employed in oil and gas plants is used to provide air for the operation of instruments and other devices.
Difference between LVDT and RVDT?
LVDT stands for linear voltage differential transformer, whereas RVDT stands for rotary voltage differential transformer.
100 Electrical Circuit Breaker Quiz
Test your knowledge with the 100 quiz questions and answers on the electrical circuit breaker, generators, and electrical equipment.
Nuclear Plant Sensors and Detectors Quiz
Test your knowledge with the 60 quiz questions and answers on the nuclear plant sensors and detectors.
PLC or DCS Control System Spares
PLC or DCS Control system spares are consumable & commissioning spares, installed, 2 years operational and mandatory spares.
Flange Types and Definitions
The most used flange types according to ASME B16.5 are Welding Neck, Slip-On, Socket Weld, Lap Joint, Threaded and Blind flange.
Determine Level of Liquid in the Vessel and its Specific Gravity
From these pressure measurements, determine the level of liquid in the vessel and its specific gravity using three transmitters.
Question on Remote Seal with Capillary Tubing Transmitter
The DP transmitter is located 5 feet above the bottom of the vessel and has a remote seal with capillary tubing with fill fluid.
