Effect of Adding a Zero to a System
Effect of Adding a Zero to a System 1. Assertion (A): The zeroes on the real axis near the origin are generally avoided in design. Reason (R): In a sluggish…
Steady-state Errors & Error Constants
Steady-state Errors & Error Constants 1. The steady state error for a unity feedback system for the input r(t) = Rt^2/2 to the system G(s) = K(s+2)/s(s3+7s2+12s) is a) 0…
Time Response of Second Order Systems – IV
This set of Control Systems test focuses on “Time Response of Second Order Systems – IV”. 1. The standard second order system to a unit step input shows the 0.36…
Time Response of Second Order Systems – II
Time Response of Second Order Systems – II 1. What will be the nature of time response if the roots of the characteristic equation are located on the s-plane imaginary…
Time Response of Second Order Systems – I
Time Response of Second Order Systems – I 1. Which of the following transfer function will have the greatest maximum overshoot? a) 9/(s2+2s+9) b) 16/(s2+2s+16) c) 25/(s2+2s+25) d) 36/(s2+2s+36) Answer:…
Time Response of First Order Systems Objective Questions
Time Response of First Order Systems Objective Questions 1. First order system is defined as : a) Number of poles at origin b) Order of the differential equation c) Total…
Standard Test Signals Objective Questions
Standard Test Signals Objective Questions 1. A feedback control systems has the inherent capability that its parameter can be adjusted to alter both its transient and steady state responses. a)…
Controller Components – Part 2 Objective Questions
Controller Components – Part 2 Objective Questions 1. Different type of construction in permanent type DC magnet are : a) Slotted armature type b) Surface wound armature type c) Surface…
Controller Components – Part 1 Objective Questions
Controller Components – Part 1 Objective Questions 1. Low power transducers called sensors prefer: a) Linear relationship between controlled variable and output variable b) Non-functional relationship between controlled variable and…
Linear Approximation of the Non-Linear System MCQ
Linear Approximation of the Non-Linear System MCQ 1. Due to which of the following reasons excessive band width in control systems should be avoided? a) It leads to slow speed…
