Control Valve Positioners
The reason why a pneumatic control valve’s stem position corresponds linearly to the amount of air pressure applied to the actuator is because mechanical springs tend to follow Hooke’s Law,...
Home » Control Valve Positioner Theory
Tag: Control Valve Positioner Theory
Pneumatic Valve Positioner Working Principle
The Pneumatic Valve Positioner is an instrument working on force balance principle to position the Control Valve stem in accordance to a pneumatic signal received from a controller or manual...
Control Valves Theory
The flow regulation in a valve is accomplished by the varying resistance as the valve is stroked, i.e. its effective cross sectional area is changed. As the fluid moves from...
Control Valve Positioner Working Principle
A Control Valve Positioner is a device used to increase or decrease the air load pressure driving the actuator until the valve’s stem reaches a “POSITION” balanced to the output SIGNAL from...