Control Systems Objective Questions & Answers
0%
Find the bandwidth of the system, when rise time of the system is give as 1msec?
Correct!
Wrong!

Consider the following statements for phase lead compensation:
Correct!
Wrong!

Find the corner frequency for the following transfer function? G(s) = 1/(s+2)
Correct!
Wrong!

The characteristic equation of a control system is given below: F(s) = s4 + s3³ +3s² + 2s +5 =0. The system is
Correct!
Wrong!

The maximum phase lag occurs at the  of the two corner frequencies?
Correct!
Wrong!

What is the effect of gain margin when the system gain is doubled?
Correct!
Wrong!

The following transfer function represents a phaselead compensator?
Correct!
Wrong!

The closed loop transfer function of a unity feedback control system is 9/(s² + 3s + 9), then the type of the system is
Correct!
Wrong!

The open loop transfer function of a unity feedback system is given by G(s) = 1/(s+2)². The closed loop transfer function will have poles at
Correct!
Wrong!

Find the angles of asymptotes of the open loop transfer function G(s) = k(s + 1)/((s(s+2)(s+4)?
Correct!
Wrong!

A transfer function has its zero in the right half of the splane. The function
Correct!
Wrong!

The open loop transfer function of non unity negative feedback system is G(s) = ks/((s+1)(s+2)), then the number of root locus branches equal to
Correct!
Wrong!

To achieve the optimum transient response, the indicating instruments are so designed as to
Correct!
Wrong!

Angle condition for complimentary root locus or inverse root locus is
Correct!
Wrong!

Which of the following is/are represents the lag compensator?
Correct!
Wrong!

Negative feedback in a closed loop control system
Correct!
Wrong!

The closed loop transfer function of a system is 25/(s² + 25). The settling time of the system is
Correct!
Wrong!

The transfer function of a phase lead compensator is given by: G(s) = (1 + 3Ts)/(1 + Ts)where T>0. What is the maximum phase shift provided by such a compensator?
Correct!
Wrong!

Find the conditions for the system to be stable?
Correct!
Wrong!

Error at corner frequency ω_{cf} of first order system is 
Correct!
Wrong!

The transfer function of phase lead compensator is given by G(s) = (1 + TS)/(1 + αTS), where, T > 0, α < 0. What is the maximum phase shit provided by this compensator?
Correct!
Wrong!

With regard to filtering property, the lead compensator is
Correct!
Wrong!

A controller transfer function is given by C(s) = (1+2s)/(1+0.2s). What is its nature and parameter?
Correct!
Wrong!

A transfer function is given as G(s) = (s²+9)(s+2)/(s+4)(s+3)(s+9) The steady state sinusoidal response will become zero at a frequency response is
Correct!
Wrong!

If the transfer function of a phase lead compensator is (s+a)/(s+b) and that of a lag compensator is (s+p)/(s+q), then which one of the following sets of conditions must be satisfied?
Correct!
Wrong!

Which of the following is/are represents the lead compensator?
Correct!
Wrong!

The compensator G(s) = 5(1 + 0.3s)/(1 + 0.1s) would provide a maximum phase shift of
Correct!
Wrong!

A open loop transfer function is given as G(s) = (s+2)/(s+1)(s1). Find the number of encirclements about '1+j0'?
Correct!
Wrong!

Find the stability for the following transfer function? G(s) = 50/s(s+5)
Correct!
Wrong!

For a second order under damped system subjected to unit step input the time response has first peak value to be 4 times the second over shoot. Determine the damping ratio ξ ?
Correct!
Wrong!

Take All Tests :
Control Systems Objective Questions & Answers – Set 1
Control Systems Objective Questions & Answers – Set 2
Control Systems Objective Questions & Answers – Set 3
Control Systems Objective Questions & Answers – Set 4
Control Systems Objective Questions & Answers – Set 5
Control Systems Objective Questions & Answers – Set 6
Control Systems Objective Questions & Answers – Set 7
Control Systems Objective Questions & Answers – Set 8