Feedforward Vs Feedback Control
Feedback control Feedback control is an important technique that is widely used in the process industries. Its main advantages are
We have the largest collection of Industrial Control Systems articles like industrial automation, Distributed Control Systems (DCS).
Feedback control Feedback control is an important technique that is widely used in the process industries. Its main advantages are
The below figure 1 shows a typical control scheme with two controllers driving the same control valve via high select
A very common control scheme is split range control in which the output of a controller is split to two
So why the confusion over Sinking and Sourcing? What’s the difference anyway? Sinking and sourcing circuits are often a source
The Diode module can be used to 100% decouple two power supplies of the same type, which are connected in parallel
Why Ground? Poor grounding not only contributes to unnecessary downtime, but a lack of good grounding is also dangerous and
Industrial Ethernet and Wireless Communication Questions. Also Read Industrial Networking and Wireless Interview Questions with Answers.
Guide lines to be followed in Field during DCS Field Loop Checks (with P&ID) and step by step procedure to be followed during DCS Loop Checks.
Basic Guidelines to be followed during Logic Checks (Follow Cause & Effect, Control Narrative, P&ID and Latest Alarm & Trip
Process Control In almost all industrial process applications, control of process variables is critical to the safe and efficient operation