DC machines and Induction Machines Viva Questions & Answers
  • Electrical Q & A

DC machines and Induction Machines Viva Questions & Answers

When DC Generator fails to build up the voltage, what are the reasons? No residual magnetism, reversal of field connections…

  • Power Systems

Advantages and Disadvantages of Per Unit System

In power system analysis, per unit (pu) system is used to express a physical variable as a fraction of base…

  • Power Systems

Why Symmetrical Components Used for Unbalanced faults in Power System

Symmetrical Components: Any unbalanced three phase system of currents, voltages or other sinusoidal quantities can be resolved in to three…

  • Electrical Machines

Synchronous Generator Salient Pole vs Non Salient Pole

Salient Pole Synchronous Alternator: Salient pole Generators will have large diameter and short axial length Pole shoes cover 2/3 of the pitch…

  • Electrical Machines

Why Armature is placed on Stator for Synchronous machines

Operation principle of synchronous machine is quite similar to dc machine. However difference exists in the synchronous machine as there…

  • PLC Tutorials

Advantages and Disadvantages of Slip Ring Induction Motor

Advantages: High Starting torque with low starting current. Maximum starting can be attained in the slip ring motor compared to…

  • PLC Tutorials

Squirrel Cage Induction Motor vs Slip Ring Induction Motor

Advantages of Squirrel-Cage Induction Motors The advantages of squirrel-cage motors compared with the slip ring induction motors are given below (i) They…

  • Temperature Measurement

How RTD Measuring the Temperature

Measuring temperature with RTD / Resistance thermometer The RTD resistance will change with respect to the temperature. So temperature will be…

  • Control Systems

Why Bias used in Proportional Controller ?

The P-Only Algorithm The P-Only controller computes a CO action every loop sample time T as:   CO = CObias…

  • Level Measurement

Torque Tube Level Measurement Principle

The displacer type liquid level measuring instrument is not a float as such, for the displacer is heavier than the  process…