How to use Masked Move Instruction in PLC
The pattern of bits in the mask determines which bits will be passed from the source address to the destination address, and which bits will be masked. Only bits in...
Home » plc data move instructions
Tag : plc data move instructions
PLC Data Comparison Instructions
As we have seen with counter and timers, some PLC instructions generate digital values other than simple Boolean (on/off) signals. Counters have current value (CV) registers and timers have elapsed...
PLC Math instructions
The IEC 61131-3 standard specifies several dedicated ladder instructions for performing arithmetic calculations. Some of them are shown here: PLC Math instructions As with the data comparison instructions, each of...
PLC Counter Instructions
A counter is a PLC instruction that either increments (counts up) or decrements (counts down) an integer number value when prompted by the transition of a bit from 0 to...