Electrical Machines Objective Questions
0%
Find the developed torque DC Series Motor having armature resistance of 0.2 Ω and taking armature current of 60 A is connected to 250 V supply. Considered brush drop of 1 V each.
Correct!
Wrong!

The armature of a DC motor is laminated to reduce
Correct!
Wrong!

Which type of motors uses slip rings?
Correct!
Wrong!

In a 3phase induction motor, torque and supply voltage are related as
Correct!
Wrong!

A DC compound motor has
Correct!
Wrong!

If an induction machine is run at above the synchronous speed it acts as
Correct!
Wrong!

Which type motors are preferred for lathes?
Correct!
Wrong!

Which of the following motor is expensive for same Kw output rates?
Correct!
Wrong!

Which type of DC Motor is preferred for Paper mills?
Correct!
Wrong!

Which type of motors are preferred in lifts?
Correct!
Wrong!

The speed of a motor falls from 1100 r.p.m at noload to 1050 r.p.m at rated load. The speed regulation of motor is
Correct!
Wrong!

A DC motor with armature resistance of 0.5 ohms connected directly to a 220 Volt supply. If the armature is stationary then the current flowing through the armature is
Correct!
Wrong!

Semi closed slots or totally closed slots are used in induction motors, essentially to
Correct!
Wrong!

Two identical loss less series motors connected in series across a dc supply voltage, runs at speed of N_{1} and N_{2}, then ratio of their output power is
Correct!
Wrong!

The armature resistance of a permanent magnet dc motor is 0.8 W. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be
Correct!
Wrong!

In a DC Shunt Motor if the load current increases then field flux
Correct!
Wrong!

The dc motor which can provide zero speed regulation at full load without any controller, is
Correct!
Wrong!

The power factor of an induction motor operating at no load will have a value around
Correct!
Wrong!

In DC series motor the speed is ______________ proportional to the armature current.
Correct!
Wrong!

What is the emf generated by a 4 pole Lap connected DC Motor rotating at 1500 rpm having 1000 conductors and useful flux per pole is 0.4 mWb.
Correct!
Wrong!

In electric locomotive which of the following motor are used ?
Correct!
Wrong!

If the full load speed of 3phase, 50Hz induction motor is 950 rpm, what is its half load speed nearly equals to?
Correct!
Wrong!

The speed of a 3phase induction motor operating in its stable region
Correct!
Wrong!

On what factors the speed of dc motor depends?
Correct!
Wrong!

The rotor slots are slightly skewed in squirrel cage induction motor to
Correct!
Wrong!

A DC Shunt Motor having shunt field resistance of 250 Ω and armature resistance of 0.5 Ω is connected to 250 V supply and load current of 21 A. What is the back emf generated ?
Correct!
Wrong!

In the 3phase induction motor, the resultant flux is of a constant nature and is
Correct!
Wrong!

Swinburnes test is applicable to
Correct!
Wrong!

Which of these types of motor is used in elevators?
Correct!
Wrong!

For a DC Shunt Motor having armature resistance of 0.5 Ω and 2 A armature current at noload, when the armature current is changed to 20 A at loaded condition the speed is 1000 r.p.m. What is the speed at noload?
Correct!
Wrong!
