Motor Control Center (MCC) Signal Interface Termination (SIT)
Motor control center (MCC) signal interface termination (SIT) includes electrical substation, control philosophy, power circuits, installation techniques.
Motion Detection based Street Light: PLC Logic Solution
In this article. you will learn the motion detection-based street light control using a sensor with PLC logic solution.
Exhaust Fan Control: Example of PLC Timer Programming
When the stove is ON, the exhaust fan control logic will be activated and then remain ON for 1 minute even after the stove is OFF.
Elevator Control: PLC Program with 5-Second Floor Stops
This is an elevator control application using a PLC Program with 5-second floor stops before moving to the next floor.
Parking Garage Indicator: PLC Automation System
In the parking garage indicator, when a spot is empty and a vehicle approaches the gate, the buzzer activates and the barrier lifts.
Pump and Mixer Operations Example: PLC Timer-Based Control
In this article, you will learn the pump and mixer operations example with PLC timer based control application program.
Machine Tool and Coolant Control: PLC Ladder Logic Design
Design PLC ladder logic using one toggle switch to program the machine tool and coolant system application.
Machine Indicator Lights: PLC Programming Solution
In this article, you will learn the warning light system and the PLC programming solution for the machine indicator lights.
4-20mA Linear Conversion Calculation for VFD Drive (Formula)
4-20mA linear conversation calculation for VFD Drive and conversion Formula and with Example table. Download the Excel file.
Glass Cutting and Polishing Machine: PLC Automation Solution
In this article, you will learn the glass cutting and polishing machine PLC programming and automation solution.
