Viral Nagda, Author at Inst Tools

Most Asked Questions on Servo Motor (Answers)

In this post, we will learn some most asked questions on servo motor with answers during an electronics and electrical engineer interview.

Learn the difference between machine learning and artificial intelligence in this blog post. Learn definition, real-world applications with examples.

In this article, you will learn the top tools required for PLC programmer to carry at the site for commissioning or for some service calls.

SCADA provides graphics for industrial automation systems such as PLC, RTU, etc. Learn the most asked questions on SCADA with answers.

A PLC program written in Instruction List language consists of series of instructions that are executed sequentially by the logic controller.

Learn what is an IP address in an ethernet network protocol and how to set the IP address in PLC, SCADA. HMI, and Computer.

Site commissioning steps for PLC programmers such as power-up, hardware checks, configure I/O, loop checks, logic testing and simulation.

Two of the most widely used circuits in digital electronics are DAC (digital to analog converters) and DSP (digital signal processors).

In this article, we will learn the difference between Machine Expert Basic and Machine Expert software in Schneider PLC.

One of the oldest PLC languages is ladder logic. Here we will learn differences between ladder logic with other programming languages.