Editorial Staff, Author at Inst Tools

Design a Water Pump PLC Program using CX-Programmer

Learn to design a water pump PLC program using CX-Programmer with dual modes: RTC activation and sensor-based control.

In this post, we will learn how to do troubleshooting fluid systems pressure changes and possible solutions.

Developing PLC logic for water pumping, filtration for 30 seconds, chemical addition for 5 seconds, and then transfer the water.

PLC logic designed for efficient automation control of spray nozzle, fans, and puncher in industrial processes.

In this article, you will learn the wood sawing and blower system automation and explained the PLC control design.

Implement smart home automation solutions using PLC logic for stairway lighting control with the help of sensors.

Develop a PLC program for 2 push buttons to control 1 output to turn ON or OFF as per the logic.

Design traffic lights ladder diagram using timers in the PLC programming to control the Red, Yellow, and Green signals.

In this article. you will learn the motion detection-based street light control using a sensor with PLC logic solution.

When the stove is ON, the exhaust fan control logic will be activated and then remain ON for 1 minute even after the stove is OFF.