Interconnection between PLC, MCC, LCP & Pumps – Video

This video shows us the relation between Programmable Logic Controller (PLC), motor control center (MCC), Local Control Panel (LCP) for controlling a Pump or Motor.

PLC Pump Control Video

MCC : Motor Control Center or Substation where motor will be powered.

PLC/DCS : Control System, where Motor can be controlled as per logic (Auto) or as per operator action (Manual).

LCP : Local Control Panel which is installed in the field, near motor in which start, stop push buttons are available

If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.

You can also follow us on Facebook and Twitter to receive daily updates.

Read Next:

Don't Miss Our Updates
Be the first to get exclusive content straight to your email.
We promise not to spam you. You can unsubscribe at any time.
Invalid email address

4 thoughts on “Interconnection between PLC, MCC, LCP & Pumps – Video”

Leave a Comment